3DprintTechDesign is creating 3D Printing videos and related content
5

patrons

Hi, Anton here. Thank you for navigating to my Patreon page



I am the Youtube channel 3D Print Tech Design, and there's where I spend most of my time doing videos on 3D-printers, techniques, experiments and so much more. 

Outside of that, I do 3D Printing Time-lapses and try to survive on my newly started 3D consulting company. 

I strongly believe in making, creating and sharing anything that has the name "3D" in it. I express this love with you by sharing my thoughts, experiences and projects in to videos on YouTube.  
My specialty is that I know the whole spectrum around 3D. Not only have I printed a lot, I've also done VFX/Animation, CAD, 3D-Scanning, professional 3D-Consulting, video production and loads of technical hobby activities all related to 3D. Probably something you like too right?

Here's a few things you can expect from me!

I will always try to make things using my own funds. But being self employed does take it's toll and If I deserve it, I'd be incredible happy to receive your support. I will try to spend as much time available for all you Patrons in here. But don't be afraid to ask me anything via PM on twitter, here in comments. As a contributor I always prioritize you.


Community 3D Printer

Together with you, my Patrons I want to be even more free and not depend on 3D-Printers for review and I've created a new concept. I call it Community 3D Printer.

With this concept, We each chip in a bit (i'll try to use a bigger base sum from YouTube ads and affiliate links to set a good start) and we collectively decide what printer to buy for reviews, testing, experimenting and modding. At the end of a time-period, this printer is given (for free) to one of you who contributed to it.
All you need to enter is become a Patreon!
You could also contribute directly at a Livestream

(currently, Micromake DIY Delta is being reviews before given away) ETA end of June -18.


By watching my videos and reading my content I hope that you learn something interesting each time, find inspiration and maybe most importantly do so while being mildly entertained.

Have a look on what's been produced already and please consider supporting me Anton Månsson and the content I create on 3D Print Tech Design!
Tiers
Helping 3DpTD
$1 or more per month
Thank you for helping out! 

You'll show your support and appreciation. Helping out a struggling creator!

Support 3DpTD and the Community3Dprinter
$2 or more per month
-Be part of the Community 3D Printer

And helping the content creation even more! Thank you!

3DpTD 3D-Models and more!
$4 or more per month

Apart from helping out, you're also giving for model creatons and getting exclusive models shared with you, such as Crew Dragon 2

Goals
5 of 100 patrons
With this support I can commit to delivering one awesome 3D-model each month! This milestone will allow me to remove one day of "day-job" to spend modelling. Woah!
1 of 1
Hi, Anton here. Thank you for navigating to my Patreon page



I am the Youtube channel 3D Print Tech Design, and there's where I spend most of my time doing videos on 3D-printers, techniques, experiments and so much more. 

Outside of that, I do 3D Printing Time-lapses and try to survive on my newly started 3D consulting company. 

I strongly believe in making, creating and sharing anything that has the name "3D" in it. I express this love with you by sharing my thoughts, experiences and projects in to videos on YouTube.  
My specialty is that I know the whole spectrum around 3D. Not only have I printed a lot, I've also done VFX/Animation, CAD, 3D-Scanning, professional 3D-Consulting, video production and loads of technical hobby activities all related to 3D. Probably something you like too right?

Here's a few things you can expect from me!

I will always try to make things using my own funds. But being self employed does take it's toll and If I deserve it, I'd be incredible happy to receive your support. I will try to spend as much time available for all you Patrons in here. But don't be afraid to ask me anything via PM on twitter, here in comments. As a contributor I always prioritize you.


Community 3D Printer

Together with you, my Patrons I want to be even more free and not depend on 3D-Printers for review and I've created a new concept. I call it Community 3D Printer.

With this concept, We each chip in a bit (i'll try to use a bigger base sum from YouTube ads and affiliate links to set a good start) and we collectively decide what printer to buy for reviews, testing, experimenting and modding. At the end of a time-period, this printer is given (for free) to one of you who contributed to it.
All you need to enter is become a Patreon!
You could also contribute directly at a Livestream

(currently, Micromake DIY Delta is being reviews before given away) ETA end of June -18.


By watching my videos and reading my content I hope that you learn something interesting each time, find inspiration and maybe most importantly do so while being mildly entertained.

Have a look on what's been produced already and please consider supporting me Anton Månsson and the content I create on 3D Print Tech Design!

Recent posts by 3DprintTechDesign

Tiers
Helping 3DpTD
$1 or more per month
Thank you for helping out! 

You'll show your support and appreciation. Helping out a struggling creator!

Support 3DpTD and the Community3Dprinter
$2 or more per month
-Be part of the Community 3D Printer

And helping the content creation even more! Thank you!

3DpTD 3D-Models and more!
$4 or more per month

Apart from helping out, you're also giving for model creatons and getting exclusive models shared with you, such as Crew Dragon 2