Kevin Darrah is creating Electronics Tutorials
75

patrons

Hello, my name is Kevin Darrah and I make YouTube Videos about Electronics.

I'm just a one-man-band with a camera and a bunch of electronics lying around.  I try to show you how it all works by building extravagant projects then breaking them down piece by piece until it all makes sense.  I wouldn't say that my videos are focused in any one particular area - you might see a detailed video on how to build an 8x8x8 RGB LED cube to how to start your car with your phone to how to build a solar powered automatic watering system and so on... 

I'm here on Patreon not because I won't make videos unless you support, but because this will help me make higher quality videos more frequently.  I have a very long list of future projects and ideas for videos, but buying parts and spinning boards can get expensive.  Oh boy, and can you imagine if I could do this full time - imagine an LED cube the size of a house!  ha!  But seriously, the pledges totally help and I would love to produce more content at a higher frequency.  
Tiers
Pledge $1 or more per month
A big thanks! Thanks for dropping a buck in the tip jar!  I hope what I'm doing here is helping you out in some way, shape, or form, so here's your way to give thanks back.  I'll give you access to the private Patreon blog up here so you can interact with me - offer suggestions, hear about new videos, new boards, and whatever else that's going on.  I'll also hook you up with a link to a folder where I keep all of the high-res photos used for the YouTube video thumbnails. These are high quality images that look great printed on a 30"x20" poster. Hang one your wall, or just scroll through and drool...
Pledge $10 or more per month
Bare Board Club! This is pretty cool stuff here.  I'll send you the bare boards for the projects I'm working on that you can then go and build up yourself and use in your projects!  I'll try to send out a new board once a month - see the blog for updates on different boards I'm working on.  There's a wiki page for each board I send out that has all the information you need.  Most of the boards will be easy to solder with only through-hole parts, so don't worry if you're surface mount skills aren't quite there yet (or if you drink too much coffee like me...)  Oh and if you have cool idea for a board, make sure you leave a comment in the blog.  Since we're only talking about bare boards here, international shipping works too.  If my videos have helped you get through a rough time in school, helped you rediscover how fun electronics can be, or just simply opened your world up to how all of these crazy gadgets work, then here's your chance to say thanks and help me keep this thing going.
Hello, my name is Kevin Darrah and I make YouTube Videos about Electronics.

I'm just a one-man-band with a camera and a bunch of electronics lying around.  I try to show you how it all works by building extravagant projects then breaking them down piece by piece until it all makes sense.  I wouldn't say that my videos are focused in any one particular area - you might see a detailed video on how to build an 8x8x8 RGB LED cube to how to start your car with your phone to how to build a solar powered automatic watering system and so on... 

I'm here on Patreon not because I won't make videos unless you support, but because this will help me make higher quality videos more frequently.  I have a very long list of future projects and ideas for videos, but buying parts and spinning boards can get expensive.  Oh boy, and can you imagine if I could do this full time - imagine an LED cube the size of a house!  ha!  But seriously, the pledges totally help and I would love to produce more content at a higher frequency.  

Recent posts by Kevin Darrah

Tiers
Pledge $1 or more per month
A big thanks! Thanks for dropping a buck in the tip jar!  I hope what I'm doing here is helping you out in some way, shape, or form, so here's your way to give thanks back.  I'll give you access to the private Patreon blog up here so you can interact with me - offer suggestions, hear about new videos, new boards, and whatever else that's going on.  I'll also hook you up with a link to a folder where I keep all of the high-res photos used for the YouTube video thumbnails. These are high quality images that look great printed on a 30"x20" poster. Hang one your wall, or just scroll through and drool...
Pledge $10 or more per month
Bare Board Club! This is pretty cool stuff here.  I'll send you the bare boards for the projects I'm working on that you can then go and build up yourself and use in your projects!  I'll try to send out a new board once a month - see the blog for updates on different boards I'm working on.  There's a wiki page for each board I send out that has all the information you need.  Most of the boards will be easy to solder with only through-hole parts, so don't worry if you're surface mount skills aren't quite there yet (or if you drink too much coffee like me...)  Oh and if you have cool idea for a board, make sure you leave a comment in the blog.  Since we're only talking about bare boards here, international shipping works too.  If my videos have helped you get through a rough time in school, helped you rediscover how fun electronics can be, or just simply opened your world up to how all of these crazy gadgets work, then here's your chance to say thanks and help me keep this thing going.