Creating 3D printable miniatures for tabletop games

Select a membership level

Generous Tipster

per month

Thank you! Each and every contribution is greatly appreciated and will help me to obtain my goals.

  • Ability to make suggestions what I should model next (which will then be considered to be included in the polls).
  • Ability to vote on polls
  • Help support my work and connect with other Patrons
Most popular

First Founder

Limited (8 of 50 remaining)
per month

Congratulations, you laid the base for this Patreon to exist and gave it the first push to take off! Thank you. Your trust deserves a discount! 

  • Ability to make suggestions what I should model next (which will then be considered to be included in the polls)
  • Ability to vote on polls
  • Access to my Discord community
  • Access to 3d models/STL files in my special Dropbox folder
Includes Discord benefits

Core Supporter

per month

You are the reason why I can continue to do what I do. As a Core Supporter, you are very much like a support structure under an unprintable overhang. Thank you!

  • Ability to make suggestions what I should model next (which will then be considered to be included in the polls)
  • Ability to vote on polls
  • Access to my Discord community 
  • Access to 3d models/STL files in my special Dropbox folder
Includes Discord benefits




per month

About LabradoriteWolf

Hey guys, welcome to my Patreon page! Thank you for your interest in my creations. If you become a Patron today, you will immediately get access to all the models I released so far (check them out below)! I will release more models over the next weeks. 

Who am I?
My name is Michelle Lampe, also known as LabradoriteWolf across the web. While I recently graduated as a biologist, my true passion lies in art and design. During my studies I barely had time to create, thus, I decided to set some time aside after graduation to focus on exploring my creative abilities. In August 2019 I registered my art business "LabradoriteWolf Creations", acquired a Creality Ender 3 3d printer, and familiarized myself with Zbrush to create my own models. 

What will you get?
To begin with, you will get at least 2 3d printable models meant for Fantasy tabletop games, such as D&D and Pathfinder each month. I will upload these in a special Dropbox folder which Patrons can access as long as they support me. The amount of models will stack up over the months and with every Patreon goal reached, I will raise the minimum amount of models I release per month.
I will mainly focus on creatures and monsters, but will design playable characters as well. My goal is to create creatures with a twist. Monsters you are familiar with, but haven't seen in this particular form yet. For example, an Arctic Owlbear composed of a polar bear and snowy owl! ;)

Why 3d printable miniatures? 
The answer is simple, in 2019, my friends and I decided to go on our own D&D adventure. It was the first time after a long while that I played a tabletop game. It felt magical. The first thing I did after I got my 3d printer was design our characters to play with during sessions. I absolutely loved being able to work on a design on my laptop one moment, only to hold it physically in my hands a couple of hours later. Check out the printed crew below! 

Why this Patreon?
I would love to explore 3d modelling and printing more. By setting up this Patreon, I hope to get compensated a little bit for my time I put in my models, so I can slowly but surely get more time to work on creating, improving and releasing 3d models on a regular basis. 

My printer and specifics
Currently, I have only one 3d printer, my Creality Ender 3. This means I will test all the models I make if they are suitable for FDM printing. I have to say I do not shy away from using supports, as I think trying to design minis that are supportless limits creativity and dynamic poses a whole lot. If you are struggling with supports on your FDM printer, I am happy to help you select the perfect settings though! 
The plan is to eventually get myself a resin printer as well, most likely an Elegoo Mars or Anycubic Photon. This will be one of the goals that can be unlocked here on Patreon :) (as it will allow me to prepare files for resin printing as well!)

Terms and conditions
Just to make sure we're all on the same page, it's time to lay down some ground rules:

  • All content shared to you here on Patreon and through Dropbox links is for your personal use only (with exception for Patrons in the Merchant tier, see below). 
  • Redistributing, selling or freely uploading STL files of my models is strictly forbidden. 
  • You are not allowed to make molds to cast my models for mass production. 
  • You cannot use any of my models or derivatives of them in projects on Kickstarter or other crowdfunding platforms. 
  • All copyrights of the content shared to you through this Patreon will belong to me. No rights are transferred to Patrons upon downloading my files. Files, designs and imagery are protected by intellectual property laws.
Things that you can do, however, as long as you credit me as the original designer (preferably with a link to this Patreon or my social media): 
  • Take pictures of printed designs to show on your socials
  • Make videos and live streams involving printed designs
  • Showcase painted versions of my designs across the web

Merchant tier
All above rules are in effect for Patrons of the Merchant tier as well, with a few exceptions: 
  • You are allowed to sell 3d prints (and 3d prints only!) of my models. You cannot make molds or casts of these prints to sell for mass production. You are also not allowed to sell STL files. 
  • You can sell 3d prints either painted or unpainted
  • You must give me full credits for the model as the original artist
  • If you are planning to sell prints of my models in a specific place, please give me an heads up in advance
  • Resellers of prints are allowed (e.g. buying physical prints from a licensed merchant to then paint and resell again), as long as the reseller follows the same rules as the licensed merchant. That means resellers cannot make molds or casts of bought prints and full credits should be given to me as the original artist. Merchants should make it clear on their listings that resellers should stick to these rules. 
  • If you violate my rules, I can remove Patrons from the Merchant at any time without warning

$361.90 of $500 per month
I will get myself a resin printer (either Elegoo Mars or Anycubic Photon), to optimize my models for resin printing as well! 
3 of 3

Become a patron to

Unlock 9 exclusive posts
Be part of the community
Connect via private message

Recent posts by LabradoriteWolf

How it works

Get started in 2 minutes

Choose a membership
Sign up
Add a payment method
Get benefits