Lilykill is creating 3D Models for 3D Printing
72

patrons

$409
per month
My name is Daniel Lilygreen (lilykill), and I create 3D models for 3D printing along with bringing these models to life with hard work and a lot of sandpaper.

I have been creating models for the past couple of years and I have always strive for model accuracy and quality of work above all else. So far, I have received a lot of positive feedback as a result of my efforts, fuelling my drive to want to go further. For anyone not familiar with my work, here is my MyMiniFactory page where some of my models are published and can already be downloaded for free. myminifactory.com/users/lilykill.

So, why Patreon? Increasingly I have had more and more contact from people asking for advice, hints and tips on 3D printing and 3D modelling I soon realized that creating this page could help support the equipment and consumables used from creating these props and bringing them to life. I’ll even show you guys recordings of my workshop sessions where I get down to the most exciting part of model creation - finishing and painting the printed parts, finally bringing the prop to life.


Tiers
The Supporter
$2 or more per month 4 patrons
Thank you for your support, every little helps and will be put to good use to help my cause.
The Builder
$5 or more per month 48 patrons
Access to the STL's of my Patreon exclusive designs and an extra thank you for your generous contribution to my effort.
The Tinkerer
$10 or more per month 22 patrons
Access to the STL's and CAD files of my Patreon exclusive designs and access to any of the build/stream videos I make as well.
My name is Daniel Lilygreen (lilykill), and I create 3D models for 3D printing along with bringing these models to life with hard work and a lot of sandpaper.

I have been creating models for the past couple of years and I have always strive for model accuracy and quality of work above all else. So far, I have received a lot of positive feedback as a result of my efforts, fuelling my drive to want to go further. For anyone not familiar with my work, here is my MyMiniFactory page where some of my models are published and can already be downloaded for free. myminifactory.com/users/lilykill.

So, why Patreon? Increasingly I have had more and more contact from people asking for advice, hints and tips on 3D printing and 3D modelling I soon realized that creating this page could help support the equipment and consumables used from creating these props and bringing them to life. I’ll even show you guys recordings of my workshop sessions where I get down to the most exciting part of model creation - finishing and painting the printed parts, finally bringing the prop to life.


Recent posts by Lilykill

Tiers
The Supporter
$2 or more per month 4 patrons
Thank you for your support, every little helps and will be put to good use to help my cause.
The Builder
$5 or more per month 48 patrons
Access to the STL's of my Patreon exclusive designs and an extra thank you for your generous contribution to my effort.
The Tinkerer
$10 or more per month 22 patrons
Access to the STL's and CAD files of my Patreon exclusive designs and access to any of the build/stream videos I make as well.