Maker Steve

is creating 3D Printing Designs, Electronics and more

1

patron

$14

per month
Hello, I’m Steve Beecroft from Rochester, Washington.
I have been a Hacker (the good kind) of sorts for about 25 years. I have managed a large number of small business network and a couple pretty large ones. I have a Masters of Science in Network Security from Capitol College in Maryland, a BA in Business Administration from Washington State University (Go Cougs!) and a handful of Associate degrees from Lower Columbia College in Longview, Washington. I have acquired a number of IT certifications from CompTia and Microsoft over the years, most recently a CISSP and CEH. I can honestly say at this point, I have forgotten more about computers and networking than most people will ever know.
I have also been in the service for over 20 years. As a National Guardsman branched Artillery, I know how to blow things up. With deployments to Kuwait and Iraq, I have seen some sand and sun. You’ll see some of my Artillery in my 3D designs I have uploaded to Thingiverse.

I started Makersteve.com early in 2018 to help 3D Printers around the world with the challenge that is 3D Printing.  I'm a maker, designer and some might consider some of my work art!
Tiers
Recognition on the MakerSteve.com site.
$10 or more per month
Makersteve 3D Printed Artillery Shell
$100 or more per month
By donating 100.00 I will print and ship 3D Printed 105mm Piggy Bank.  This is a life size replica of a 105mm Artillery Shell.

And include your name in the monthly recognition post!

MakerSteve 3D Printed 155mm Piggy Bank
$250 or more per month
By donating 250.00 I will print and ship 3D Printed 155mm Piggy Bank.  This is a life size replica of a 155mm Artillery Shell with a slot in the fuze for coins.  Nearly 27 inches tall, takes a week to print.

And include your name in the monthly recognition post!

Goals
$14 of $450 per month
Help MakerSteve GoPro with 4K video

When I reach $450.00, I will purchase a GoPro and create 4K videos.

I've got a lot to share on 3D Printing but it's expensive and I would like your help. I would like to purchase a GoPro Hero 6 to support 4K video and post to Youtube and the makersteve.com site.You can help by donating as little as a dollar to reach my goal and I will produce high quality videos on assembly, troubleshooting and general 3D printing.
Once I get enough support, the cam will be in the mail and the videos will be on their way to you!
See more at https://makersteve.com
Thanks,
Steve
1 of 2
Hello, I’m Steve Beecroft from Rochester, Washington.
I have been a Hacker (the good kind) of sorts for about 25 years. I have managed a large number of small business network and a couple pretty large ones. I have a Masters of Science in Network Security from Capitol College in Maryland, a BA in Business Administration from Washington State University (Go Cougs!) and a handful of Associate degrees from Lower Columbia College in Longview, Washington. I have acquired a number of IT certifications from CompTia and Microsoft over the years, most recently a CISSP and CEH. I can honestly say at this point, I have forgotten more about computers and networking than most people will ever know.
I have also been in the service for over 20 years. As a National Guardsman branched Artillery, I know how to blow things up. With deployments to Kuwait and Iraq, I have seen some sand and sun. You’ll see some of my Artillery in my 3D designs I have uploaded to Thingiverse.

I started Makersteve.com early in 2018 to help 3D Printers around the world with the challenge that is 3D Printing.  I'm a maker, designer and some might consider some of my work art!

Recent posts by Maker Steve

Tiers
Recognition on the MakerSteve.com site.
$10 or more per month
Makersteve 3D Printed Artillery Shell
$100 or more per month
By donating 100.00 I will print and ship 3D Printed 105mm Piggy Bank.  This is a life size replica of a 105mm Artillery Shell.

And include your name in the monthly recognition post!

MakerSteve 3D Printed 155mm Piggy Bank
$250 or more per month
By donating 250.00 I will print and ship 3D Printed 155mm Piggy Bank.  This is a life size replica of a 155mm Artillery Shell with a slot in the fuze for coins.  Nearly 27 inches tall, takes a week to print.

And include your name in the monthly recognition post!