Drive gear, Motor mount and slipring published!
I've printed and tested the drive gear, the motor mount and the slipring bracket. Works beautifully so really pleased. The motor I've based it on is http://www.maplin.co.uk/p/mfa-45-15v-large-501-single-ratio-motor-gearbox-n99bn however I've made the bracket which holds the motor removable so I can created custom ones if you've got an alternative motor. Drop me a PM but I will need the motor dimensions and any mounts to see if we can get it to fit. For the slip ring I used a 6 wire 2 amp one from ebay http://www.ebay.co.uk/itm/12-5mm-300Rpm-6-Wires-CIRCUITSx2A-Capsule-Slip-Ring-AC-240V-for-Monitor-Robotic/201830726353?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 . All files are now published in the Patreon area along with a board mounting plate (still WIP). Now I've got my internet back up I can publish the files :-)