The Makers Cult are creating 3D-Printable Tabletop Miniatures
426
patrons
$4,594
per month
What you can expect from this Patreon?
Every month you can expect a great selection of 3d printable files for sci-fi tabletop wargaming, designed by the combined efforts of 3 miniature designers!

What sets us a part from other similar Patreons?
We are 3 designers for the price of 1, that means our patreon can offer a huge diversity of products every month, we will each have separate polls so chances are we will always have something for you. We also are very social on our community discord and want to involve you as much as possible, we hope this will become a central hub for everyone in this hobby.

How many models per month?
Every model takes a different amount of time to complete, we prefer to work by a Slot system. Each month you can expect a minimum of 12 Slots worth of models. Different classes of model will use up different amounts of slots :

1 Slot - Bits / Standard Miniature / Scenic base
2 Slots - Detailed Character / Large Miniature / Small Vehicle
3 Slots - Vehicle / Bust / Unique High-detailed Character
4-6 Slots - Large vehicle / Extra Large Miniature
8+ Slots - Titan

To access the 3D printable content, you must pledge for one of the available tiers available, custom pledges don't work. All tiers get all the models we make (except past months releases that are available on the shop).


How does it work and why be part of the community?
  • Once you become a patron, you will immediately gain access to the 'Welcome Pack', this pack is a warming gift to give you a taste of what is to come :)
  • During every month we will upload our new set of models for you to download and enjoy. 
  • As soon as you subscribe you will gain access to current month as well as future months releases (as long as you continue supporting)
  • If you are a late joiner you can access our older models by purchasing through our store.
  • Being part of the community allows you to influence the models we make, through a polling system.
  • During the month you can expect us to share our ideas and 'WIP' pictures to allow you to engage with us to share your thoughts. We want to involve you as much as possible so that you enjoy the most out of our designs.

Discord

  • Our discord is open to everyone, no need to subscribe.
  • We have an extremely active and engaging community, where we talk 3d printing in general, show off lots of WIP, and talk with the community about what they would like to see in future releases.
Come join us! https://discord.gg/E8k5aJH
 

Where are the files?
the files are in the form of a download link under a patron Tier only post, to navigate to the post with the downloads we recommend using the '#tag' search on the top left of the 'posts' page.
If you are new and need help please feel free to message us on discord or here on patreon.

NOTE: Please download the months models ASAP as they will be removed just before the end of each month in preparation for the following months new uploads. If you did somehow forget to download a month you paid for, PM us here or on discord and we will verify and send you lost files.

What is in the WELCOME PACK
The Welcome Pack includes now 6 miniatures, two created by each designer within 'The Makers Cult'. Thanks to our patrons for reaching our first goal in the first month !


What can you do with these files?
Models will be provided ready to print, but orientation and support generation is up to each user as it is highly dependant on printer technology. We recommend Resin for miniatures and FDM for larger pieces.

 License

  • Private Use Only
  • Non Commercial
  • No Derivatives
NOTE: Do not under any circumstances share these files for free or commercially! It is a one way ticket to a ban on patreon and discordIt is not fair on other patrons and will discourage us from continuing this service.

About Us, Why Patreon
All 3 of us have been solo modellers on Thingiverse for a long time, we met each other through discord and found we shared similar interests quite quickly. We all love the 3d printing community and have already contributed many thousands of modelling hours already for both yours and our enjoyment.
While we plan to continue to upload to Thingiverse occasionally we feel an extension via a collaborative patreon will drive us to invest more hours into creating even higher quality models!
Here is a short bio from each of us...

  • Seb (Seb) - 34 year old from France, currently working as designer for precise mechatronic devices. I have learned 3D printing and model creation along the 3 past years as a hobby, just for fun. My pleasure is to design and print models which show the actual potential of desktop entry-level 3d printing machines.
  • Will (Brexit) - 22 year old from the UK, graduate in product design and have a great love for Sci-fi tabletop. I have self taught myself to sculpt miniatures digitally and hope to one day make something out of it :) My 'Nickname' was a 'gamer-tag' joke 3 years ago that unfortunately managed to stick one day...
  • Matt (Garin) - 28 Year old Canadian (originally). I am an R&D engineer who designs for and works professionally with 3d printing and other prototyping machines. I've been designing and printing game pieces for almost a decade now.  It has been a blast seeing the technology grow in the last few years and it is quite exciting now that we're entering the age of fine detail production.


Thingiverse
https://www.thingiverse.com/BREXIT
https://www.thingiverse.com/SebTheis
https://www.thingiverse.com/MatttKing

Store
You will find on the store all our previous months models :

www.cgtrader.com/themakerscult

Thanks you!
We all really appreciate your support and hope to make your time as a patreon an enjoyable experience. Cheers.
Tiers
1st wave
$7.50 or more per month (sold out!)

The founders of the Patreon

Includes Discord rewards
2nd wave
$10 or more per month (sold out!)

The builders of the Patreon

Includes Discord rewards
3rd wave
$12.50 or more per month only 24 left

The people of the Patreon

Includes Discord rewards
4th wave
$15 or more per month

The warriors Of the patreon

Includes Discord rewards
Goals
426 of 500 patrons
At 500 patrons we will increase our minimum slots from 12 to 16 and reward our patrons on month of achievement 3 legendary character models!
2 of 2
What you can expect from this Patreon?
Every month you can expect a great selection of 3d printable files for sci-fi tabletop wargaming, designed by the combined efforts of 3 miniature designers!

What sets us a part from other similar Patreons?
We are 3 designers for the price of 1, that means our patreon can offer a huge diversity of products every month, we will each have separate polls so chances are we will always have something for you. We also are very social on our community discord and want to involve you as much as possible, we hope this will become a central hub for everyone in this hobby.

How many models per month?
Every model takes a different amount of time to complete, we prefer to work by a Slot system. Each month you can expect a minimum of 12 Slots worth of models. Different classes of model will use up different amounts of slots :

1 Slot - Bits / Standard Miniature / Scenic base
2 Slots - Detailed Character / Large Miniature / Small Vehicle
3 Slots - Vehicle / Bust / Unique High-detailed Character
4-6 Slots - Large vehicle / Extra Large Miniature
8+ Slots - Titan

To access the 3D printable content, you must pledge for one of the available tiers available, custom pledges don't work. All tiers get all the models we make (except past months releases that are available on the shop).


How does it work and why be part of the community?
  • Once you become a patron, you will immediately gain access to the 'Welcome Pack', this pack is a warming gift to give you a taste of what is to come :)
  • During every month we will upload our new set of models for you to download and enjoy. 
  • As soon as you subscribe you will gain access to current month as well as future months releases (as long as you continue supporting)
  • If you are a late joiner you can access our older models by purchasing through our store.
  • Being part of the community allows you to influence the models we make, through a polling system.
  • During the month you can expect us to share our ideas and 'WIP' pictures to allow you to engage with us to share your thoughts. We want to involve you as much as possible so that you enjoy the most out of our designs.

Discord

  • Our discord is open to everyone, no need to subscribe.
  • We have an extremely active and engaging community, where we talk 3d printing in general, show off lots of WIP, and talk with the community about what they would like to see in future releases.
Come join us! https://discord.gg/E8k5aJH
 

Where are the files?
the files are in the form of a download link under a patron Tier only post, to navigate to the post with the downloads we recommend using the '#tag' search on the top left of the 'posts' page.
If you are new and need help please feel free to message us on discord or here on patreon.

NOTE: Please download the months models ASAP as they will be removed just before the end of each month in preparation for the following months new uploads. If you did somehow forget to download a month you paid for, PM us here or on discord and we will verify and send you lost files.

What is in the WELCOME PACK
The Welcome Pack includes now 6 miniatures, two created by each designer within 'The Makers Cult'. Thanks to our patrons for reaching our first goal in the first month !


What can you do with these files?
Models will be provided ready to print, but orientation and support generation is up to each user as it is highly dependant on printer technology. We recommend Resin for miniatures and FDM for larger pieces.

 License

  • Private Use Only
  • Non Commercial
  • No Derivatives
NOTE: Do not under any circumstances share these files for free or commercially! It is a one way ticket to a ban on patreon and discordIt is not fair on other patrons and will discourage us from continuing this service.

About Us, Why Patreon
All 3 of us have been solo modellers on Thingiverse for a long time, we met each other through discord and found we shared similar interests quite quickly. We all love the 3d printing community and have already contributed many thousands of modelling hours already for both yours and our enjoyment.
While we plan to continue to upload to Thingiverse occasionally we feel an extension via a collaborative patreon will drive us to invest more hours into creating even higher quality models!
Here is a short bio from each of us...

  • Seb (Seb) - 34 year old from France, currently working as designer for precise mechatronic devices. I have learned 3D printing and model creation along the 3 past years as a hobby, just for fun. My pleasure is to design and print models which show the actual potential of desktop entry-level 3d printing machines.
  • Will (Brexit) - 22 year old from the UK, graduate in product design and have a great love for Sci-fi tabletop. I have self taught myself to sculpt miniatures digitally and hope to one day make something out of it :) My 'Nickname' was a 'gamer-tag' joke 3 years ago that unfortunately managed to stick one day...
  • Matt (Garin) - 28 Year old Canadian (originally). I am an R&D engineer who designs for and works professionally with 3d printing and other prototyping machines. I've been designing and printing game pieces for almost a decade now.  It has been a blast seeing the technology grow in the last few years and it is quite exciting now that we're entering the age of fine detail production.


Thingiverse
https://www.thingiverse.com/BREXIT
https://www.thingiverse.com/SebTheis
https://www.thingiverse.com/MatttKing

Store
You will find on the store all our previous months models :

www.cgtrader.com/themakerscult

Thanks you!
We all really appreciate your support and hope to make your time as a patreon an enjoyable experience. Cheers.

Recent posts by The Makers Cult

Tiers
1st wave
$7.50 or more per month (sold out!)

The founders of the Patreon

Includes Discord rewards
2nd wave
$10 or more per month (sold out!)

The builders of the Patreon

Includes Discord rewards
3rd wave
$12.50 or more per month only 24 left

The people of the Patreon

Includes Discord rewards
4th wave
$15 or more per month

The warriors Of the patreon

Includes Discord rewards